TRENDnet TI-F10S30 Industrial 100Base-FX Single-Mode SC Fiber Converter – 30km

The TRENDnet TI-F10S30 Industrial 100Base-FX Single-Mode SC Fiber Converter is designed to extend Ethernet network connectivity across long distances in industrial environments. It converts 10/100Mbps Ethernet connections to 100Base-FX single-mode fiber, supporting fiber transmission distances of up to 30km.

Equipped with one 10/100Mbps Ethernet port and one 100Mbps single-mode SC fiber port, the TI-F10S30 provides a practical solution for connecting remote industrial equipment, network cabinets, and facilities over fiber infrastructure. Its 1310nm optical wavelength and single-mode fiber interface support long-distance network connections using compatible 9/125µm fiber cabling.

Built for industrial deployments, the converter features an IP50-rated metal enclosure and hardened components designed to operate in temperatures ranging from -40°C to 75°C. Its compact housing supports installation in industrial control cabinets, manufacturing facilities, and other demanding environments.

The TI-F10S30 also includes configurable DIP switches for Link Fault Pass Through (LFPT) and converter or switch operating modes. A 6kV Ethernet surge protection feature, grounding point, and overload current protection help support reliable operation in industrial installations.

With 12–60V DC power input, DIN-rail and wall-mounting options, and a compact design, the TRENDnet TI-F10S30 provides a dependable fiber connectivity solution for extending Fast Ethernet networks over long distances.

Power supply note: The compatible TRENDnet TI-M6024 power supply is sold separately.

1. Key Features

• 30km Fiber Distance: Extends network connectivity over single-mode fiber up to 30km.
• Single-Mode SC Interface: Features one 100Mbps SC-type fiber port operating at 1310nm.
• Ethernet Conversion: Converts 10/100Mbps Ethernet connectivity to 100Base-FX fiber.
• Industrial Protection: IP50-rated metal enclosure for demanding industrial environments.
• Extreme Temperature Operation: Supports operating temperatures from -40°C to 75°C.
• 6kV Ethernet Surge Protection: Helps protect the Ethernet interface against electrical surges.
• Flexible Power Input: Supports 12–60V DC power input with overload current protection.
• Link Fault Pass Through: DIP switch configuration supports Link Fault Pass Through (LFPT).
• Selectable Operating Modes: Supports converter mode and switch mode.
• Flexible Installation: Includes DIN-rail and wall-mounting hardware.

2. Technical Specifications

3. Applications / Use Cases

• Industrial Network Extension: Extend Fast Ethernet connectivity across industrial facilities using single-mode fiber.
• Manufacturing Facilities: Connect remote production equipment and industrial network cabinets.
• Industrial Automation: Link Ethernet-enabled automation equipment across long distances.
• Remote Network Connections: Connect geographically separated network segments over fiber infrastructure.
• Surveillance Infrastructure: Extend compatible Fast Ethernet camera network connections over single-mode fiber.
• Utility and Infrastructure Networks: Support fiber-based connectivity in industrial utility installations.
• Control Cabinets: Install inside industrial control panels using DIN-rail mounting.
• Building-to-Building Connectivity: Establish long-distance Fast Ethernet links between buildings using compatible single-mode fiber.

4. Compatibility

The TRENDnet TI-F10S30 is compatible with:

• 10/100Mbps Ethernet network devices.
• 100Base-FX single-mode fiber network equipment.
• Single-mode 9/125µm fiber-optic cabling.
• SC-type fiber connectors.
• Compatible Ethernet switches and network interfaces.
• Industrial Ethernet equipment operating at Fast Ethernet speeds.

Fiber Compatibility Requirements:

• Single-mode fiber cable.
• SC-type connector.
• 1310nm optical wavelength.
• Compatible 100Base-FX fiber interface at the opposite end.

Power Compatibility:

• 12–60V DC input.
• TRENDnet TI-M6024 compatible power supply, sold separately.

Important: The connected fiber equipment must support compatible 100Base-FX single-mode SC connectivity. This is a Fast Ethernet converter, not a Gigabit or SFP media converter.

5. What's Included

According to the manufacturer's V2 documentation:

• TRENDnet TI-F10S30 Industrial Fiber Converter
• Removable terminal block
• DIN-rail / wall-mounting kit

Not Included:

• TRENDnet TI-M6024 power supply
• Fiber-optic cable
• Ethernet cable
• Additional fiber networking equipment

6. FAQs

Q1. What is the maximum fiber distance supported by the TI-F10S30?
The TI-F10S30 supports single-mode 100Base-FX fiber connections over distances up to 30km.

Q2. What type of fiber does the TI-F10S30 use?
It uses single-mode 9/125µm fiber-optic cabling with an SC-type connector and a 1310nm operating wavelength.

Q3. Does the TI-F10S30 support Gigabit Ethernet?
No. The TI-F10S30 supports 10/100Mbps Ethernet and 100Mbps 100Base-FX fiber connectivity.

Q4. What is the operating temperature range?
The converter supports an industrial operating temperature range of -40°C to 75°C.

Q5. Does the TI-F10S30 include a power adapter?
No. The compatible TRENDnet TI-M6024 power supply is sold separately. The converter supports a 12–60V DC power input.

Q6. Can the TI-F10S30 be mounted on a DIN rail?
Yes. DIN-rail and wall-mounting hardware are included for flexible industrial installation.

Q7. What is Link Fault Pass Through (LFPT)?
LFPT helps communicate link failure conditions between connected network interfaces, allowing network equipment to detect a fiber or Ethernet link failure.

Q8. Is the TI-F10S30 suitable for industrial environments?
Yes. Its IP50-rated metal enclosure, -40°C to 75°C operating temperature range, and industrial protection features make it suitable for demanding industrial installations.

7. Why Buy from Multilink?

Multilink Solutions Inc. supplies networking and connectivity products for business, industrial, and enterprise applications. We focus on providing dependable networking hardware from established manufacturers, helping customers find products that match their technical and infrastructure requirements.

When you purchase the TRENDnet TI-F10S30 from Multilink Solutions Inc., you benefit from:

• Genuine networking products from established manufacturers.
• Product-focused technical information.
• Solutions for industrial and commercial networking environments.
• Assistance with product selection and compatibility requirements.
• A broad range of networking and connectivity equipment.