TRENDnet TI-UPG62 7-Port Industrial Gigabit PoE++ DIN-Rail Switch, 4 PoE++ Ports, 2 SFP Slots, 240W

The TRENDnet TI-UPG62 7-Port Industrial Gigabit PoE++ DIN-Rail Switch provides high-power Ethernet connectivity for industrial networking environments. Featuring four Gigabit PoE++ ports, one dedicated Gigabit Ethernet port, and two Gigabit SFP slots, this unmanaged industrial switch combines copper and fiber connectivity in a compact, hardened design.

With a total PoE power budget of up to 240W, the TI-UPG62 supports IEEE 802.3af PoE, IEEE 802.3at PoE+, and IEEE 802.3bt PoE++ devices. It delivers up to 15.4W per PoE port under 802.3af, 30W under 802.3at, and up to 95W per port under 802.3bt when supplied with the required 56V DC input. The total available PoE power remains limited by the 240W budget.

The two Gigabit SFP slots provide options for fiber uplinks using compatible 1000Mbps SFP transceivers. Its 14Gbps switching capacity, 4K MAC address table, and 9KB jumbo frame support help accommodate industrial network traffic.

Designed for challenging environments, the TI-UPG62 features an IP50-rated metal enclosure, redundant 52–56V DC power inputs, overload current protection, and a power-failure alarm relay. It supports operating temperatures from -40°C to 75°C and includes both DIN-rail and wall-mount hardware.

The TRENDnet TI-UPG62 is suitable for industrial automation, high-power wireless access points, PTZ cameras, IP surveillance, VoIP systems, access control, and other industrial Ethernet applications.

Power supply sold separately. TRENDnet identifies the TI-S24048 and TI-S48048 as compatible power supply options. Verify the power supply's capacity against the required PoE load and input voltage before deployment.

1. Key Features

• 7-Port Gigabit Connectivity: Includes four Gigabit PoE++ ports, one dedicated Gigabit Ethernet port, and two Gigabit SFP slots.

• 240W PoE Budget: Supplies up to 240W of total PoE power.

• Up to 95W per Port: Supports IEEE 802.3bt PoE++ with up to 95W per port.

• Multi-Standard PoE Support: Compatible with IEEE 802.3af PoE, IEEE 802.3at PoE+, and IEEE 802.3bt PoE++ devices.

• Fiber Uplink Options: Two Gigabit SFP slots support compatible fiber transceivers.

• 14Gbps Switching Capacity: Supports high-speed Gigabit Ethernet traffic.

• IP50-Rated Metal Housing: Hardened enclosure designed for industrial environments.

• Redundant Power Inputs: Dual 52–56V DC inputs support redundant industrial power connections.

• Power Failure Alarm: Built-in alarm relay provides power-failure notification.

• Extreme Temperature Operation: Supports operating temperatures from -40°C to 75°C.

• DIN-Rail and Wall Mounting: Includes both DIN-rail and wall-mount brackets.

• NDAA / TAA Compliance: Listed as compliant for the United States and Canada.

2. Technical Specifications

3. Applications / Use Cases

• Industrial Automation: Connects Ethernet-enabled industrial controllers and automation equipment.

• PTZ Surveillance Cameras: Supplies PoE++ power to compatible high-power PTZ cameras.

• Wireless Access Points: Powers compatible high-performance industrial wireless access points.

• IP Surveillance Networks: Provides Gigabit connectivity and PoE power for compatible IP cameras.

• Fiber Network Uplinks: Connects industrial network segments using compatible Gigabit SFP modules.

• Access Control Systems: Supports compatible PoE-powered access control equipment.

• VoIP and IPTV: Connects compatible VoIP phones and IPTV decoders.

• Manufacturing Facilities: Supports industrial Ethernet connectivity in production environments.

• Remote Infrastructure: Supports network installations requiring redundant power inputs and extended temperature operation.

4. Compatibility

The TI-UPG62 V3 is designed for:

• IEEE 802.3af PoE devices.

• IEEE 802.3at PoE+ devices.

• IEEE 802.3bt PoE++ devices.

• Gigabit Ethernet devices supporting 10/100/1000Mbps.

• Compatible 1000Mbps SFP fiber transceivers.

• Single-mode and multimode fiber equipment when used with appropriately matched SFP modules.

• Industrial Ethernet devices.

• Compatible 52–56V DC industrial power supplies.

Power supply compatibility:

TRENDnet identifies these power supplies for the TI-UPG62 V3:

• TI-S24048

• TI-S48048

Important compatibility considerations:

• A 56V DC power input is required to deliver the maximum 95W PoE++ output per port.

• The total PoE power budget is 240W; the maximum port output cannot be multiplied by four and treated as the available total power.

• The switch accepts 52–56V DC input.

• The power supply is sold separately.

• SFP modules and fiber cables are not included.

• Both ends of a fiber connection must use compatible SFP specifications, wavelength, fiber type, and connector.

• This is an unmanaged switch and does not provide advanced configurable VLAN or Layer 2 management features.

• Confirm connected equipment's IEEE PoE standard and power requirements before deployment.

5. What's Included

• TRENDnet TI-UPG62 Industrial Gigabit PoE++ Switch

• Removable 6-pin Terminal Block

• DIN-Rail Mounting Bracket

• Wall-Mount Brackets

Sold separately:

• Industrial DC power supply

• Gigabit SFP transceivers

• Fiber optic cables

• Ethernet patch cables

6. Frequently Asked Questions

Q1. How many ports does the TRENDnet TI-UPG62 V3 have?

It has seven network interfaces: four Gigabit PoE++ RJ-45 ports, one dedicated Gigabit RJ-45 port, and two Gigabit SFP slots.

Q2. What is the PoE power budget?

The TI-UPG62 provides a total PoE power budget of up to 240W.

Q3. Does the TI-UPG62 support 95W PoE++?

Yes. Its four PoE++ ports support up to 95W per port under IEEE 802.3bt. A 56V DC power input is required for maximum 95W output per port.

Q4. Does the switch support standard PoE and PoE+ devices?

Yes. It supports IEEE 802.3af PoE, IEEE 802.3at PoE+, and IEEE 802.3bt PoE++ devices.

Q5. Does the TI-UPG62 have fiber connectivity?

Yes. It includes two Gigabit SFP slots for compatible 1000Mbps fiber transceivers.

Q6. Is the TI-UPG62 suitable for industrial environments?

Yes. It features an IP50-rated metal enclosure and supports an operating temperature range of -40°C to 75°C.

Q7. Does the TI-UPG62 support redundant power?

Yes. It has dual 52–56V DC power inputs with overload current protection and a power-failure alarm relay.

Q8. Is a power supply included?

No. The power supply is sold separately. TRENDnet lists the TI-S24048 and TI-S48048 as compatible options.

7. Why Buy from Multilink?

Multilink Solutions Inc. supplies networking and infrastructure products for business, industrial, and commercial applications. We focus on providing clear product information to help customers identify equipment that meets their technical and deployment requirements.

• Networking products for industrial and commercial applications.

• Manufacturer-focused technical product information.

• Solutions for industrial PoE and fiber networking.

• Product selection support for compatible networking equipment.