BaiCells BRU3501 Nova-243 Outdoor LTE TDD Base Station, 3.5 GHz, 2×10 W

The BaiCells BRU3501 Nova-243 is an outdoor LTE TDD eNodeB designed to provide radio access for compatible wireless broadband networks. It is intended for network operators, wireless service providers, and infrastructure integrators deploying LTE access equipment.

The BRU3501 belongs to the Nova-243 family of outdoor LTE base stations. Its documented radio architecture includes two 10 W transmit channels and 2×2 MIMO. The platform supports LTE TDD operation and is designed to integrate with compatible LTE core network infrastructure.

LTE Performance and Connectivity

The Nova-243 platform supports LTE Release 9 and channel bandwidths of 5, 10, 15, and 20 MHz. The manufacturer datasheet lists peak TDD performance of up to 112 Mbps downstream and 20 Mbps upstream at 20 MHz. These are theoretical peak figures under specified operating configurations, not guaranteed application throughput.

The platform supports up to 96 concurrent users in TDD mode. Actual capacity and performance depend on the spectrum configuration, radio conditions, traffic load, user equipment, and backhaul network.

Radio Configuration and Hardware

The BRU3501 uses a 2×2 MIMO radio architecture with two 10 W transmit channels. The Nova-243 installation documentation describes external antenna connections and Gigabit Ethernet connectivity.

The precise frequency range must be matched to the actual BRU3501 variant. The model's FCC authorization identifies operation within 3655–3695 MHz; the manufacturer's datasheet also discusses broader Band 42/43 configurations. Do not assume that every BRU3501 supports the entire 3550–3700 MHz range.

Network Management

The Nova-243 platform provides local web-based management and support for BaiOMC network management. Documented operational functions include equipment status monitoring, alarms, performance monitoring, maintenance, and software management.

The installation guide also describes LTE network functions and automatic configuration capabilities. The exact software version and enabled features may vary by unit.

Outdoor Installation

The Nova-243 datasheet specifies an IP66 ingress protection rating, an operating temperature range of -40°C to 55°C, and pole or wall mounting options. These platform specifications should be checked against the specific unit and its applicable installation documentation.

A compatible power supply, external antenna system, suitable mounting arrangement, and compatible LTE core network are required for deployment. Verify which accessories are included with the item being sold.

Business Applications

The BRU3501 is suitable for consideration in outdoor LTE TDD infrastructure projects where its frequency configuration and network requirements match the intended deployment. Potential applications include wireless broadband access and LTE network expansion.

Before ordering, verify the operating frequency, local spectrum authorization, antenna requirements, and compatibility with the intended core network and user equipment.

1. Key Features

• Outdoor LTE base station: Designed for outdoor LTE TDD wireless network deployments.

• 3.5 GHz platform: Intended for compatible Band 42/43 configurations, subject to the specific hardware variant.

• 2×10 W transmit power: Two transmit channels rated at 10 W each.

• 2×2 MIMO: Supports two radio transmission paths.

• LTE Release 9: Based on the 3GPP LTE Release 9 platform.

• Up to 96 concurrent users: Manufacturer-documented capacity for TDD operation.

• Flexible channel bandwidth: Supports 5, 10, 15, and 20 MHz configurations.

• Gigabit Ethernet backhaul: Provides wired network connectivity.

• Outdoor-rated enclosure: IP66 ingress protection documented for the Nova-243 platform.

• Network management: Supports web-based management and BaiOMC network management.

2. Technical Specifications

3. Applications / Use Cases

• Outdoor LTE TDD wireless broadband infrastructure.

• Fixed wireless access deployments using compatible LTE infrastructure.

• LTE network expansion in authorized 3.5 GHz spectrum.

• Rural or underserved-area wireless broadband projects.

• Private LTE deployments where the frequency, core network, and regulatory requirements are compatible.

• Outdoor radio access networks with Gigabit Ethernet backhaul.

4. Compatibility

The BaiCells BRU3501 is intended for compatible LTE TDD networks. Verify the exact hardware variant before selecting antennas, user equipment, or network components.

• Frequency compatibility: Match the unit's documented frequency range to the deployment spectrum. Do not assume that every BRU3501 supports the full 3.5 GHz band.

• LTE user equipment: Devices must support the relevant LTE band and network configuration.

• LTE core network: Confirm interoperability with the intended EPC and network configuration.

• Backhaul: Provide compatible Gigabit Ethernet connectivity.

• Antenna system: Confirm supported frequencies, connector type, antenna gain, cabling, and installation requirements.

• Power: Verify the required 48 V DC supply and its electrical specifications.

• Regional deployment: Check local spectrum licensing and equipment approval requirements.

Compatibility with a particular LTE core network, specific modem, or 5G NR network should not be assumed without documentation.

5. What's Included

Package contents have not been confirmed in the available official documentation. Verify the supplied base station, power adapter, power cord, antenna-related accessories, mounting hardware, and any other components before publishing a definitive package-contents list.

6. Frequently Asked Questions

Q1. What is the BaiCells BRU3501?

The BRU3501 is a Nova-243 outdoor LTE TDD base station designed to provide radio access for compatible LTE wireless broadband networks.

Q2. Which frequency band does the BRU3501 support?

The BRU3501 is associated with the Nova-243 3.5 GHz Band 42/43 platform. The exact supported range must be verified for the individual unit; the cited FCC authorization covers 3655–3695 MHz.

Q3. What is its transmit power?

The Nova-243 platform is specified with two 10 W transmit channels and a 2×2 MIMO radio configuration.

Q4. What is the maximum data rate?

The Nova-243 datasheet lists peak TDD rates of up to 112 Mbps downstream and 20 Mbps upstream at 20 MHz under the specified configuration. Actual throughput varies by deployment.

Q5. How many users can it support?

The manufacturer documents support for up to 96 concurrent users in TDD mode.

Q6. What network connection does it use?

The platform provides Gigabit Ethernet backhaul connectivity and external RF antenna connections as described in the installation documentation.

Q7. Is the BRU3501 designed for outdoor installation?

Yes. The Nova-243 datasheet documents an IP66-rated enclosure and outdoor mounting options. Confirm the installation requirements for the exact unit.

7. Why Buy from Multilink?

Multilink Solutions Inc. helps businesses identify networking equipment for their infrastructure requirements.

• Product sourcing: Assistance identifying networking hardware for deployment projects.

• Quotation assistance: Request a quote based on your procurement requirements.

• Model identification: Help distinguishing related BaiCells products and hardware variants.

• Specification review: Assistance reviewing documented frequency ranges, interfaces, and technical requirements.

• Compatibility review: Support checking product suitability against the intended network configuration before purchase.