BaiCells SNAP EP3011 Dual-Band Wi-Fi PoE Router (1103000242)

The BaiCells SNAP EP3011 is an on-premises Wi-Fi access point and router designed to provide network access for users connecting through compatible BaiCells outdoor Customer Premises Equipment (CPE).

It supports dual-band 2.4GHz and 5GHz Wi-Fi using IEEE 802.11b/g/n/ac standards. Its 2×2 MIMO architecture and internal omnidirectional antennas provide wireless connectivity for phones, laptops, tablets, and other compatible Wi-Fi devices.

The router includes one Gigabit WAN port with 24V passive PoE output and two Gigabit LAN ports. The PoE output can power compatible outdoor CPE through the Ethernet connection, avoiding a separate power connection for that equipment when supported.

Network features include NAT, VLAN, VPN, firewall functions, diagnostics, and management through the web GUI, ACS, or BaiCells OMC. The EP3011 is suitable for deployments that require local Wi-Fi access and connectivity to a compatible LTE CPE.

Compatibility note: The PoE output is specified as 24V passive PoE, not automatically compatible with IEEE 802.3af/at devices. Verify the connected equipment's required voltage and PoE pinout before connecting.

1. Key Features

• Dual-band Wi-Fi: 2.4GHz and 5GHz.

• Wireless standards: IEEE 802.11b/g/n/ac.

• 2×2 MIMO with internal omnidirectional antennas.

• Up to 866Mbps peak Wi-Fi rate under 802.11ac.

• One Gigabit WAN port with PoE output.

• Two Gigabit LAN ports.

• 24V passive PoE output, 0.5A.

• Supports OMC and TR-069 management.

• Supports NAT, VLAN, VPN, and firewall functions.

• Standard one-year warranty according to the manufacturer datasheet.

2. Technical Specifications

3. Applications

• Local Wi-Fi access for compatible BaiCells outdoor LTE CPE.

• Home and small-office wireless connectivity.

• Wireless access for phones, laptops, tablets, and other Wi-Fi devices.

• Network deployments requiring Gigabit Ethernet and 24V passive PoE output.

• Managed deployments using BaiCells OMC or TR-069-compatible management systems.

4. Compatibility

• Designed to work with compatible BaiCells outdoor CPE, including supported Atom Outdoor Low-Gain and High-Gain models.

• Supports standard Wi-Fi devices using IEEE 802.11b/g/n/ac.

• PoE output is 24V passive PSE at 0.5A. Confirm voltage and pinout compatibility before connecting any device.

• Regional features may vary. Confirm the correct US model and regulatory requirements before ordering.

5. What's Included

• BaiCells SNAP EP3011 router.

• Power adapter: manufacturer datasheet specifies 100–240V AC input and 12V DC, 1A output.

• Other accessories or cables: not confirmed in the available manufacturer datasheet.

Confirm the exact box contents with the supplier before publishing additional accessories.

6. Installation and Setup

1. Connect the WAN port to the compatible network or outdoor CPE as specified for the deployment.

2. Connect compatible Ethernet devices to the LAN ports.

3. Use the supplied power adapter according to the manufacturer's instructions.

4. Configure Wi-Fi and routing settings through the supported management interface.

5. If using PoE output, verify the connected CPE's voltage and pinout before connection.

7. Warranty and Support

The BaiCells SNAP PoE Router datasheet states a standard one-year warranty, with extended warranty availability. Confirm the warranty applicable to SKU 1103000242 in the destination market before publishing a firm regional warranty promise.

8. Frequently Asked Questions

Q: What is the BaiCells 1103000242?

A: It is the BaiCells SNAP EP3011 dual-band Wi-Fi PoE router.

Q: Does it support 5GHz Wi-Fi?

A: Yes. It supports both 2.4GHz and 5GHz Wi-Fi.

Q: What is the maximum Wi-Fi speed?

A: The published peak rate for 802.11ac is 866Mbps. Actual throughput depends on the environment and connected devices.

Q: How many Ethernet ports does it have?

A: One Gigabit WAN port with PoE output and two Gigabit LAN ports.

Q: What type of PoE does it provide?

A: It provides 24V DC passive PoE at 0.5A. Do not assume compatibility with IEEE 802.3af/at equipment.

Q: Can it be managed remotely?

A: The datasheet lists web GUI, ACS, OMC, and TR-069 management support.

Q: What are its dimensions and weight?

A: Approximately 174 × 147 × 182mm and 323g, according to the manufacturer datasheet.

9. Why Buy from Multilink?

Multilink can help verify the correct regional model, power requirements, and compatibility with your existing network equipment before purchase.