TRENDnet TPE-104GS Gigabit PoE Splitter, Adjustable 5V / 9V / 12V DC Output

The TRENDnet TPE-104GS Gigabit PoE Splitter is designed to connect non-PoE network devices in locations where a separate electrical outlet may not be readily available. It receives power and network data through a single Ethernet cable from a compatible IEEE 802.3af PoE switch or injector, then separates the connection into Gigabit Ethernet data and DC power outputs.

Its adjustable output voltage supports 5V, 9V, and 12V devices, making it suitable for a range of compatible networking and electronic equipment. The output voltage can be selected using the built-in DIP switch to match the connected device's power requirements.

The TPE-104GS supports full-duplex Gigabit Ethernet speeds, helping maintain high-speed network connectivity while delivering power over an existing Ethernet cable. It can extend connectivity to compatible non-PoE devices located up to 100 meters (328 feet) from the PoE source.

For flexible installation, the splitter includes a combination 5.0mm and 3.5mm DC jumper cable. Its compact design makes it convenient for small office networks, IP surveillance installations, wireless networking equipment, and other applications requiring power for non-PoE devices.

The TPE-104GS offers a practical way to reuse existing PoE infrastructure, reduce additional power cabling, and simplify network device installations.

1. Key Features

• Gigabit PoE Splitting: Separates incoming PoE into independent Ethernet data and DC power outputs.

• Adjustable DC Voltage: Selectable 5V, 9V, or 12V output for compatible devices.

• Gigabit Ethernet: Supports full-duplex Gigabit network speeds.

• IEEE 802.3af Compatible: Works with compatible PoE switches and injectors.

• Extended Connectivity: Powers compatible non-PoE devices up to 100 meters (328 feet) away.

• Flexible Device Connection: Includes a combination 5.0mm and 3.5mm DC jumper cable.

• Simple Installation: Compact plug-and-play design requires no software configuration.

• LED Indicator: Provides visual indication of power status.

• NDAA Compliant: Manufacturer-listed NDAA compliance.

2. Technical Specifications

3. Applications / Use Cases

• Non-PoE IP camera installations

• Wireless access point connectivity

• Small office networking

• Remote Ethernet device installations

• Network equipment requiring 5V, 9V, or 12V DC

• Existing PoE infrastructure expansion

• Remote monitoring and networking equipment

• Ethernet-connected devices without built-in PoE support

4. Compatibility

• IEEE 802.3af-compliant PoE switches

• IEEE 802.3af-compatible PoE injectors

• Gigabit Ethernet network connections

• Non-PoE devices requiring 5V, 9V, or 12V DC

• Devices with compatible 5.0mm or 3.5mm DC power connections

Important compatibility note: Check the connected device's required voltage, current, connector polarity, and power consumption before installation. The device must be compatible with one of the splitter's selectable DC output settings.

5. What's Included

• TRENDnet TPE-104GS Gigabit PoE Splitter

• Quick Installation Guide

• Combination 5.0mm and 3.5mm DC jumper cable

6. Frequently Asked Questions

Q1. What does the TRENDnet TPE-104GS do?
It separates an incoming PoE connection into a Gigabit Ethernet data output and a DC power output, allowing compatible non-PoE devices to use PoE infrastructure.

Q2. What output voltages does the TPE-104GS support?
The V2 model supports selectable 5V, 9V, and 12V DC output.

Q3. Does this PoE splitter support Gigabit Ethernet?
Yes. It supports 10/100/1000Mbps Ethernet and full-duplex Gigabit speeds.

Q4. What PoE standard does it support?
It is compatible with IEEE 802.3af PoE switches and injectors.

Q5. What is the maximum Ethernet cable distance?
The splitter supports compatible PoE connections up to 100 meters (328 feet) from the PoE source.

Q6. Can I use it with a non-PoE IP camera?
Yes, provided the camera's DC voltage, current requirements, connector, and polarity match the splitter's output.

Q7. Does the TPE-104GS require a separate power adapter?
No separate AC power adapter is required. It receives power through the incoming PoE Ethernet connection.

Q8. Can I change the output voltage while the splitter is powered?
No. Disconnect power from the splitter before changing the voltage DIP switch. Reconnect power only after selecting the correct output voltage.

7. Why Buy from Multilink?

Multilink Solutions Inc. supplies networking and connectivity products for business, commercial, and infrastructure applications. We focus on dependable sourcing, accurate product information, and helping customers select equipment suited to their network requirements.