BaiCells EG2030C-M1 Atom ID04 Indoor LTE Cat 4 CPE, 2.5 GHz, Wi-Fi

The BaiCells EG2030C-M1 Atom ID04 is an indoor LTE Cat 4 customer-premises equipment device designed to deliver broadband connectivity through compatible LTE TDD networks. It combines cellular connectivity, integrated Wi-Fi, and wired Ethernet in a compact indoor unit.

LTE connectivity

The EG2030C-M1 supports LTE TDD Bands 40 and 41 and complies with 3GPP Release 9 Category 4 standards. Its internal omnidirectional LTE antenna has a specified gain of 5 dBi for the 2.x GHz model. Actual connectivity and performance depend on network availability, signal conditions, SIM provisioning, and operator compatibility.

Integrated Wi-Fi and Ethernet

The device provides 2.4 GHz Wi-Fi using IEEE 802.11b/g/n, with 2×2 MIMO and a theoretical peak Wi-Fi rate of up to 300 Mbps under the 802.11n specification. One RJ45 Ethernet port supports 10/100 Mbps connections for compatible wired devices. The Ethernet interface is Fast Ethernet, not Gigabit Ethernet.

Network management and security

The CPE supports local and remote web-based management, TR-069 network management, SIM PIN management, SIM locking, and cell locking. Network functions include NAT or bridge mode, IPv4/IPv6, port forwarding, DMZ, firewall filtering, access control, and diagnostic tools such as ping and traceroute.

Indoor deployment

The EG2030C-M1 is intended for indoor customer-premises use where a compatible LTE network is available. Its compact enclosure and integrated wireless functionality make it suitable for providing network access to compatible wired and Wi-Fi devices.

Before purchasing, verify that the specific device supports the intended operator's LTE frequency band and SIM requirements. Band support alone does not guarantee compatibility with every cellular network.

1. Key Features

• Model: BaiCells EG2030C-M1

• Product family: Atom ID04 Gen 2 indoor LTE CPE

• LTE standard: 3GPP Release 9, Category 4

• LTE bands: TDD Bands 40 and 41

• LTE antenna: Internal omnidirectional antenna, 1T2R, 5 dBi at 2.x GHz

• Wi-Fi: 2.4 GHz IEEE 802.11b/g/n, 2×2 MIMO

• Ethernet: One RJ45 10/100 Mbps port

• SIM: 2FF USIM, supporting 1.8 V/3 V

• Network management: Local and remote web interface, TR-069

• Network features: NAT or bridge mode, IPv4/IPv6, firewall controls

• Device dimensions: 193 × 168 × 74 mm (7.6 × 6.6 × 2.9 inches)

• Device weight: 400 g (14 oz)

2. Technical Specifications

3. Applications / Use Cases

• Indoor broadband access over compatible LTE TDD networks

• Customer-premises connectivity for homes, offices, and small sites

• Wi-Fi connectivity for compatible phones, laptops, tablets, and other wireless devices

• Wired network access for compatible Ethernet-equipped devices

• LTE-based connectivity deployments where Bands 40 or 41 are supported

• Small-network deployments requiring basic routing and network-management functions

4. Compatibility

Before ordering, check the following:

• Cellular network: The operator must support a compatible LTE TDD band, particularly Band 40 or Band 41 for this model.

• SIM card: The device uses a 2FF USIM. Confirm SIM activation and service provisioning with the carrier.

• Wi-Fi devices: Compatible with devices supporting 2.4 GHz IEEE 802.11b/g/n Wi-Fi.

• Wired devices: Compatible Ethernet equipment using an RJ45 connection at 10/100 Mbps.

• Power: Use a compatible 12 V DC supply with the correct connector and electrical rating.

• Regional approval: Confirm that the unit's certification and supported frequency range are suitable for the intended country and network.

Compatibility with a particular carrier, SIM plan, or LTE network should not be assumed solely from the model number.

5. What’s Included

The official datasheet confirms the device's technical specifications but does not provide a complete retail package-content list.

• BaiCells EG2030C-M1 Atom ID04 indoor LTE CPE: verify against the actual inventory.

• Power adapter and other accessories: confirm before publishing as included.

Do not advertise an adapter, Ethernet cable, SIM card, or other accessory as included unless the supplied package has been checked.

6. Frequently Asked Questions

Q1. What is the BaiCells EG2030C-M1 used for?

It is an indoor LTE Cat 4 CPE that provides network connectivity over compatible LTE TDD networks and distributes connectivity to wired Ethernet and Wi-Fi devices.

Q2. Which LTE bands does the EG2030C-M1 support?

The manufacturer identifies this model as a 2.5 GHz version supporting LTE TDD Bands 40 and 41.

Q3. Does this model support Gigabit Ethernet?

No. It has one RJ45 10/100 Mbps Ethernet port.

Q4. Does the EG2030C-M1 have built-in Wi-Fi?

Yes. It supports 2.4 GHz IEEE 802.11b/g/n Wi-Fi, with 2×2 MIMO and a theoretical peak rate of up to 300 Mbps.

Q5. What type of SIM card does it use?

The manufacturer specifies a 2FF USIM supporting 1.8 V and 3 V. The SIM must also be provisioned for a compatible LTE network.

Q6. What is the maximum LTE speed?

The datasheet lists peak rates at 20 MHz bandwidth of up to 100 Mbps downstream and 10 Mbps upstream. Actual speeds depend on the network, signal conditions, and service configuration.

Q7. Can the device be managed remotely?

Yes. The datasheet lists local and remote web management and TR-069 network management support.

Q8. Will this device work with any LTE carrier?

No. The carrier must support a compatible frequency band and the device must be accepted and provisioned on that network. Confirm carrier compatibility before ordering.

7. Why Buy from Multilink Solutions?

Multilink Solutions Inc. helps businesses source networking equipment for their connectivity and infrastructure requirements.

• Product identification using manufacturer model numbers

• Technical specification review to support informed purchasing

• Assistance with product selection and deployment requirements

• Support for business networking and connectivity procurement