BaiCells EG3015M-M30-HP Atom ID15M-HP Indoor LTE Cat 15 CPE with Wi-Fi 6

The BaiCells EG3015M-M30-HP Atom ID15M-HP is an indoor LTE Cat 15 customer premises equipment device designed to provide broadband connectivity for homes, offices, and compatible fixed wireless access deployments.

Operating over LTE Time Division Duplex (TDD) networks, the EG3015M-M30-HP combines cellular broadband connectivity, integrated wireless LAN, Ethernet connectivity, and routing functionality in a single device. Its internal antennas and carrier aggregation capabilities support wireless broadband installations where the device's supported frequency bands align with the service provider's network.

LTE Performance and Carrier Aggregation

The Atom ID15M-HP supports LTE Bands 41, 42, 43, and 48. It complies with 3GPP Release 12 Cat 15 standards and supports inter-band and intra-band 4-carrier aggregation, with an aggregate channel bandwidth of up to 80 MHz.

Under the configurations specified in the manufacturer datasheet, the device can achieve peak LTE data rates of up to 580 Mbps downstream and 80 Mbps upstream. Actual performance depends on the deployed LTE network, spectrum availability, signal conditions, carrier aggregation configuration, and network scheduling.

The M30 variant supports a maximum combined LTE transmit power of 30 dBm, subject to applicable regional EIRP limits.

Wi-Fi 6 and Ethernet Connectivity

The EG3015M-M30-HP includes an integrated dual-band Wi-Fi access point supporting IEEE 802.11b/g/n/ac/ax. Its 2x2 MIMO wireless design supports Wi-Fi 6 connectivity on 2.4 GHz and 5 GHz bands.

Three Gigabit Ethernet ports provide wired connectivity for compatible computers, network devices, and other Ethernet-enabled equipment. The auto-sensing interfaces support 10/100/1000 Mbps Ethernet operation.

Routing, Management, and Security

The device supports NAT and transparent bridge modes, allowing network administrators to select an appropriate deployment configuration. Additional networking functions include VLAN tagging, port forwarding, DMZ, port triggering, and supported VPN functions.

Administration features include a web-based management interface, SNMP, and TR-069 network management support. Security controls include IP/MAC/URL filtering, access control lists, SIM locking, and SIM PIN management.

Deployment Considerations

The EG3015M-M30-HP is an indoor CPE intended for use with compatible LTE TDD networks. Before purchasing, confirm that the cellular provider supports the device's frequency bands and that the intended service and regional deployment requirements are met.

Important: The standard EG3015M-M30-HP is identified in the manufacturer datasheet as the CAT-B CBSD variant. This version requires Spectrum Access System (SAS) connectivity and Certified Professional Installer (CPI) certification for the applicable deployment. It should not be confused with the separately identified EG3015M-M30-HP-EUD variant.

1. Key Features

• LTE Cat 15 connectivity: Complies with 3GPP Release 12 LTE standards.

• Supported LTE bands: Bands 41, 42, 43, and 48, subject to network and regional compatibility.

• Carrier aggregation: Supports inter-band and intra-band 4-carrier aggregation (4CA).

• High-power LTE transmission: Supports a maximum combined transmit power of 30 dBm, subject to applicable regional EIRP limits.

• Integrated Wi-Fi 6: Dual-band wireless networking on 2.4 GHz and 5 GHz with 2x2 MIMO.

• Gigabit Ethernet: Three 10/100/1000 Mbps auto-sensing RJ-45 ports.

• High LTE throughput: Peak theoretical data rates of up to 580 Mbps downstream and 80 Mbps upstream under specified configurations.

• Flexible networking: Supports NAT and transparent bridge modes.

• Network administration: Web-based local and remote management, SNMP, and TR-069 support.

• Integrated security controls: IP, MAC, and URL filtering, access control lists, and SIM-related security features.

2. Technical Specifications

3. Applications / Use Cases

• Fixed wireless broadband access for compatible LTE TDD networks.

• Indoor internet connectivity for homes, offices, and small business environments.

• Wired network access for computers and Ethernet-enabled devices.

• Dual-band wireless access for compatible laptops, phones, tablets, and other Wi-Fi clients.

• Broadband deployments requiring LTE carrier aggregation.

• Network installations using NAT or transparent bridge mode.

• Managed CPE deployments using supported web management, SNMP, or TR-069 interfaces.

• Compatible Band 48 CBRS deployments that meet the applicable SAS and CPI requirements.

4. Compatibility

The BaiCells EG3015M-M30-HP is designed for compatible LTE TDD networks and Ethernet- or Wi-Fi-enabled client devices.

• LTE networks: Requires a compatible network operating on one or more supported LTE Bands 41, 42, 43, or 48.

• CBRS deployments: The standard EG3015M-M30-HP CAT-B CBSD variant requires SAS connectivity and CPI certification for the applicable deployment.

• Ethernet devices: Supports compatible devices through its three 10/100/1000 Mbps RJ-45 ports.

• Wi-Fi devices: Supports clients using IEEE 802.11b/g/n/ac/ax on 2.4 GHz and 5 GHz.

• SIM requirements: Uses a 4FF nano-SIM. Confirm SIM provisioning, carrier acceptance, and service-plan compatibility with the intended operator.

• Network configuration: Supports NAT and bridge modes, with additional configuration options documented by the manufacturer.

Compatibility limitation: Support for a frequency band does not guarantee activation on every carrier. Confirm operator approval, network configuration, firmware requirements, and regional regulatory conditions before ordering.

5. What's Included

Package contents for the exact EG3015M-M30-HP model have not been confirmed in the available official documentation.

Do not publish a definitive list of included accessories until the supplier or manufacturer confirms the contents of the specific unit being sold.

6. Frequently Asked Questions

Q1. What is the BaiCells EG3015M-M30-HP?

It is the BaiCells Atom ID15M-HP indoor LTE Cat 15 CPE, designed to provide broadband connectivity over compatible LTE TDD networks with integrated Wi-Fi and Ethernet connectivity.

Q2. Which LTE frequency bands does it support?

The manufacturer lists LTE Bands 41, 42, 43, and 48. Confirm that the intended network operates on a supported band and accepts this device.

Q3. What is the maximum LTE data rate?

The manufacturer specifies peak rates of up to 580 Mbps downstream and 80 Mbps upstream under supported configurations. Actual throughput depends on network conditions, spectrum availability, and carrier aggregation.

Q4. Does the device support Wi-Fi 6?

Yes. The device supports IEEE 802.11ax Wi-Fi 6 on the 2.4 GHz and 5 GHz bands, alongside earlier Wi-Fi standards listed in the datasheet.

Q5. How many Ethernet ports are available?

The device has three 10/100/1000 Mbps auto-sensing RJ-45 Ethernet ports.

Q6. Can the EG3015M-M30-HP operate in bridge mode?

Yes. The manufacturer documents both NAT and transparent bridge modes. The appropriate configuration depends on the deployment and connected network equipment.

Q7. Does this model require SAS connectivity and CPI certification?

The standard EG3015M-M30-HP is identified as a CAT-B CBSD variant, for which the manufacturer specifies SAS connectivity and CPI certification requirements. Confirm the deployment requirements before purchasing. The EG3015M-M30-HP-EUD is a distinct variant with different requirements.

Q8. Can Multilink Solutions help confirm compatibility before purchase?

Yes. Contact Multilink Solutions for a quotation and assistance reviewing the exact model, supported LTE bands, deployment requirements, and intended network compatibility.

7. Why Buy from Multilink?

Multilink Solutions helps businesses source networking products and identify equipment that fits their deployment requirements.

• Networking product sourcing: Assistance identifying the appropriate manufacturer model for your project.

• Quotation assistance: Request pricing for the BaiCells EG3015M-M30-HP.

• Technical product identification: Help distinguish the standard CAT-B CBSD version from the EUD variant.

• Compatibility review: Assistance reviewing LTE band support, SIM requirements, and network deployment conditions before ordering.

• Specification review: Support interpreting manufacturer documentation and identifying requirements that need confirmation.