BaiCells EG7010C-M11 Atom OD06L Outdoor LTE Cat 6/7 CPE, 3.5 GHz, 11 dBi

The BaiCells EG7010C-M11 Atom OD06L is an outdoor LTE Cat 6/7 customer premises equipment device designed to provide wireless broadband access to residential and business users.

This model is the 3.5 GHz low-gain variant of the Atom OD06 family. It supports LTE TDD Bands 42, 43, and 48 and incorporates an internal bipolar directional antenna with an 11 dBi gain specification.

Its outdoor design and integrated routing capabilities make it suitable for fixed wireless broadband deployments where compatible LTE infrastructure is available.

LTE Performance and Carrier Aggregation

The EG7010C-M11 complies with 3GPP Release 10 Cat 6/7 specifications.

The newer BaiCells Atom OD06L datasheet documents peak rates of:

• Downlink: Up to 220 Mbps.

• Uplink: Up to 30 Mbps.

These figures are specified for a 2 × 20 MHz carrier aggregation configuration under TDD uplink/downlink configuration 2. The earlier 2020 datasheet lists up to 220 Mbps downlink and 15 Mbps uplink for a single 20 MHz carrier. Actual throughput depends on network configuration, signal quality, spectrum availability, and base-station capabilities.

Integrated Directional Antenna

The EG7010C-M11 incorporates an internal bipolar directional LTE antenna.

Key antenna characteristics:

• Antenna type: Internal directional.

• Configuration: 2T4R.

• Antenna gain: 11 dBi at 3.x GHz.

• Polarization: ±45°.

• Horizontal beamwidth: 70° ±5°.

• Vertical beamwidth: 30° ±5°.

The directional antenna is designed to support outdoor wireless installations and improve connectivity toward a compatible LTE base station.

Ethernet Connectivity and Power

The CPE provides one RJ45 Gigabit Ethernet interface supporting 10/100/1000 Mbps auto-sensing and auto-MDI/MDIX.

Power is supplied through passive PoE. The manufacturer documentation specifies a 24 VDC, 0.5 A PoE adapter output, with a universal 100–240 V AC input.

Network Management and Security

The EG7010C-M11 supports local and remote web-based management and TR-069 network management.

Documented networking and management capabilities include:

• NAT and Bridge modes.

• Router and Tunnel modes in the earlier datasheet.

• IPv4 and IPv6.

• SIM PIN management and SIM lock.

• Automatic and manual network connection.

• LTE full-band scanning and frequency locking.

• L2TP and GRE VPN tunneling.

• Port forwarding and port triggering.

• DMZ and ALG.

• IP, MAC, and URL filtering.

• Access control and SPI firewall filtering.

• Ping, traceroute, and TCP dump diagnostics.

• Local and OTA firmware upgrades.

Wi-Fi-Assisted Alignment

The device includes a 2.4 GHz Wi-Fi alignment function based on IEEE 802.11b/g/n. This feature assists installers with CPE alignment during outdoor installation.

Important: This Wi-Fi feature is documented for alignment purposes. Do not market the EG7010C-M11 as a conventional customer-facing Wi-Fi router or access point without confirming the intended firmware and configuration.

Outdoor Installation

The Atom OD06L is designed for outdoor fixed wireless access installations. The manufacturer datasheet specifies IP65 protection and supports pole- or wall-mounted installation.

The CPE is intended for compatible LTE TDD networks and should be appropriately aligned toward the serving base station.

1. Key Features

• LTE Cat 6/7: Based on 3GPP Release 10 technology.

• 3.5 GHz operation: Supports LTE TDD Bands 42, 43, and 48.

• Carrier Aggregation: Supports 2CC carrier aggregation.

• Peak data rates: Up to 220 Mbps downlink and 30 Mbps uplink under the specified 2 × 20 MHz TDD configuration.

• 2T4R antenna configuration: Four receive paths and two transmit paths.

• 11 dBi directional antenna: Integrated bipolar LTE antenna for 3.5 GHz operation.

• Gigabit Ethernet: One RJ45 10/100/1000 Mbps interface.

• Passive PoE: 24 VDC power arrangement.

• Remote management: Web GUI and TR-069 support.

• Network functionality: NAT, Bridge, Router, and Tunnel modes documented in the earlier datasheet.

• Wi-Fi-assisted alignment: 2.4 GHz Wi-Fi alignment functionality.

• Outdoor installation: IP65 enclosure protection with pole- and wall-mounting support.

2. Technical Specifications

3. Applications / Use Cases

• Fixed wireless broadband access.

• Outdoor LTE broadband deployments.

• Wireless Internet Service Provider (WISP) networks.

• Residential and business internet connectivity.

• Remote-site network access.

• Outdoor customer premises installations.

• LTE TDD networks operating on compatible 3.5 GHz spectrum.

• Wireless deployments requiring directional antennas and Gigabit Ethernet connectivity.

4. Compatibility

The EG7010C-M11 is designed for compatible LTE TDD infrastructure supporting the appropriate regional frequency configuration.

Compatibility requirements:

• LTE base station supporting Bands 42, 43, or 48, as applicable to the unit.

• Compatible LTE SIM card and network provisioning.

• 24 V passive PoE power arrangement.

• Ethernet switches, routers, and wired network equipment.

• Appropriate mounting and grounding accessories for outdoor installation.

Important limitations:

• Do not assume the device supports every frequency band listed across the Atom OD06 family.

• The exact EG7010C-M11 global part number is documented for 3.5 GHz Bands 42/43/48.

• The 2.4 GHz Wi-Fi function is for alignment, not confirmation of a standard Wi-Fi access point feature.

• Carrier aggregation performance depends on compatible network infrastructure.

5. Frequently Asked Questions

Q1. What is the BaiCells EG7010C-M11?

The EG7010C-M11 is an Atom OD06L outdoor LTE Cat 6/7 CPE designed for fixed wireless broadband connectivity.

Q2. Which frequency bands does the EG7010C-M11 support?

The 3.5 GHz model supports LTE TDD Bands 42, 43, and 48, subject to its regional configuration.

Q3. What is the maximum data rate?

The newer BaiCells datasheet specifies up to 220 Mbps download and 30 Mbps upload using 2 × 20 MHz carrier aggregation under TDD Configuration 2.

Q4. Does the EG7010C-M11 support Gigabit Ethernet?

Yes. It has one RJ45 Gigabit Ethernet interface supporting 10/100/1000 Mbps.

Q5. What type of antenna does this model use?

It uses an integrated 11 dBi bipolar directional antenna with a 2T4R configuration.

Q6. Does it support PoE?

Yes. The manufacturer specifies a 24 VDC passive PoE arrangement with a 0.5 A adapter output.

Q7. Is the EG7010C-M11 suitable for outdoor use?

Yes. It is designed for outdoor installation and has an IP65 protection rating. Pole and wall mounting are supported.

Q8. What is the difference between EG7010C-M11 and EG7010A-M11?

Both are Atom OD06 outdoor LTE Cat 6 models, but the EG7010C-M11 is the low-gain version with an 11 dBi antenna. The EG7010A-M11 is the high-gain version with a different antenna configuration and gain.

6. Why Buy from Multilink Solutions?

Multilink Solutions Inc. helps businesses and networking professionals source networking equipment for wireless broadband and connectivity deployments.

When purchasing the BaiCells EG7010C-M11, customers can request:

• Assistance sourcing BaiCells networking equipment.

• Product and model identification support.

• Help reviewing LTE band and carrier aggregation requirements.

• Assistance checking regional compatibility and installation requirements.

• Quotation and purchasing assistance.

Contact Multilink Solutions for product information and a quotation.